FAQs - J Collection

We have a matching vanilla white toe kick, model number 310412248

Minimum height leg is 2 ½” (this is when the legs are in the fold down position)

Finished height of 94.5″ including Leg, and it is not recommended to remove legs out of the cabinet.

The Legs are pressed in and can be “POPPED” out with a flat screwdriver or a small pry bar. Note that some minor chipping may occur. We do not recommend removing the legs, damages that occur while removing legs are not covered under your warranty.

We do not recommend removing the entire adjustable base from our cabinets and installing directly on the floor, as your doors, or drawers in this case, will not operate properly as it will tend to scrape the floor when opening. You may remove the adjustable portion of the leg, but not the base, which is doweled to the carcass.

The legs are 2 ¼” H when in the folded position, they are a min of 3 ¾” H when unfolded and are 5 ½” H when adjusted to the maximum height.

No, they can be removed completely but it is not recommended. To remove you can use a flat heat screwdriver to pop the legs out as they are pressed in / dowelled however, chipping to the cabinet box may occur.

No, the cabinets cannot be ordered without the legs. The legs can be removed completely but it is not recommended. To remove you can use a flat heat screwdriver to pop the legs out as they are pressed in / dowelled however, chipping to the cabinet box may occur.

The legs are made with a very durable PVC (plastic) material. They are strong enough to easily support any type of stone countertops including granite or quartz.

We do not recommend removing the entire adjustable base from our cabinets and installing directly on the floor, as your doors, or drawers in this case, will not operate properly as it will tend to scrape the floor when opening. You may remove the adjustable portion of the leg, but not the base, which is doweled to the carcase.

No, the legs cannot be purchased separately.

No, these legs are not meant to be exposed. You can just put a toe kick on them.

Yes, our base cabinets come with a pair of clips in a small bag on the inside of the cabinet. The clips insert into the pre-moulding sections on the front of the legs. The clips then hold the toe kicks in place as per below illustration.

We do not sell cabinet with caster wheels. Our cabinets will come standard with adjustable legs. The legs can be removed completely but it is not recommended. To remove you can use a flat heat screwdriver to pop the legs out as they are pressed in / dowelled however, chipping to the cabinet box may occur.

Yes, the cabinet hinges on the right as a standard, however you can switch the hinge position before you drill the door for hardware.

No, our cabinets are not primed for paint, they come already painted in our off-white and gray colors using our hand-painted 8-steps process. Removing or adding paint to the product will void your warranty.

No, the side are made of laminated particle board.

Our paint is proprietary to our product so there is no equivalent that we are able to recommend. However, most paint suppliers can easily color match paint if you bring a sample for them to match.

Yes, the doors are painted on all sides.

Vanilla white is a rich tint of off-white. Samples are available through our website.

No, they are not available in dove grey.

We don’t carry samples of our competitor products to compare the White; Our Vanilla white is a rich tint of off white. Samples are available through our website.

For base and wall cabinets the shelves are always adjustable / removable. For tall cabinets most shelves are adjustable / removable however, there are some fixed shelves to provide lateral stability to the tall units. Our tall cabinet specifications are on page 34 of our brochure at J Collection Brochure – J Collection.

Our drawer boxes come in 3 heights 5” H, 10” H, 15” H. The vertical height is approx.. 2” less that the drawer box height. The usable height between fixed shelves depends on the cabinet configuration. Our specifications are available in our brochure at J Collection Brochure – J Collection

Roll out shelves are available for a number of our base and tall configurations, details are available in the specifications sections of our brochure at J Collection Brochure – J Collection

For wall and shallow base cabinets the inside measurement of a shelf would be 13” D, for standard base and tall cabinets the inside depth is 23”D.

No, the shelves come standard, however you can remove most shelves. The exception are the fixed shelves on tall cabinets, these shelves provide structural integrity to the cabinets and cannot be removed. Details are available in the specifications sections of our brochure at J Collection Brochure – J Collection

For base and wall cabinets the shelves are always adjustable / removable. For tall cabinets most shelves are adjustable / removable however, there are some fixed shelves to provide lateral stability to the tall units. Our tall cabinet specifications are on page 34 of our brochure at J Collection Brochure – J Collection.

Unfortunately, we do not sell shelves separately. However, you will likely find there are ample shelves in our wall, base and tall units.

No, our shelves come matching the inside of the cabinet box.

Our cabinets are finished on both left and right sides only. The top and bottom of the cabinets are unfinished

Our drawers come in 5 widths, 15” (inside = 10 11/16), 18” (inside = 13 11/16”), 24” (inside = 20 11/16”), 30” (inside = 25 11/16) and 36” (inside = 31 11/16)

weight limit for the microwave shelf is 350 lbs

Weight Capacity of each Drawer would be of 77lbs.

The weight capacity of our reinforced shelf is 330lbs.

Weight limit for pull out shelves are rated for 55 pounds.

Our floating shelves can hold about 10 lbs.

The weight limit for the sliding drawers is 55lbs.

It can handle about 10 lbs.

The glass is frosted; however, you can still see silhouettes through it.

Currently, we only offer the frosted glass.

It is recommended that wall cabinets are installed 1.5” from the ceiling.

Yes, the cabinets come hinges on the right as a standard, however you can switch the hinges positions before you drill the doors for hardware.

Although we do not sell hinges or other parts separately, we do cover hinges under warranty. If you have an issue with a hinge you can request a replacement.

No, currently, only our doors are offered with soft close mechanism.

The below images show how to adjust the hinges, if you need further assistance please advise and we will send you an instruction video

No, the door handles are not included.

Our microwave cabinet will hold most standard microwaves with a trim kit. The microwave itself will be smaller in size and needs a trim kit to properly.

We have four configurations to accommodate most standard microwave / oven combination appliances. Specifications are available at J Collection Brochure – J Collection. It is important for you to check appliance dimensions prior to purchasing to ensure the appliances will fit into cabinets properly.

Our panels are finished on all 6 sides, (both faces and the 4 edges).

The base moulding is meant to be installed on a flat panel to create a furniture look, for example on the back and sides of an island. However, you can install it flush to the front of a cabinet by building a strip (raw wood or a filler piece can be used) under the toe kick area and the base moulding can attach to the front of the strip.

We design and assemble our cabinets in the USA.

Yes, our cabinets will arrive assembled.

No, these products cannot be custom ordered.

It may surprise you to know that painted MDF doors are very similar price to solid painted maple. We use MDF has it prevents hairline fractures at the joint in doors, this means our doors will look great for years to come. We offer a limited warranty so if you have any issue with the quality of our products you are covered.

No, we would not recommend using markers on any product outside of an actual dry erase board. However, our designers have been able to incorporate dry erase boards and chalk boards into many spaces. We are happy to help you with your design free of charge.

No, as our base cabinets come with legs and we do not recommend removing the legs you can not stack base cabinets. However, there are many other options to stack cabinets to create your desired effect. We are happy to help you with you design free of charge

No, this is not how cabinets are meant to be used. The only thing a washer / dryer can sit on (besides the floor) are pedestals that are purchased from the same appliance brand. The reason is they have special brackets to clip onto to prevent the machines from falling / tipping over and creating a safety hazard. We strongly advise against deviating from the appliance manufacturers safety recommendations.

There are many options for microwaves that will fit, the first step would be to find a 30” trim kit (many brands will have options for these such as GE, Whirlpool, Panasonic etc). Once you decide of the trim kit, the specs available online under the trim kit will tell you the exact model of microwaves that will work with your trim kit. We are happy to help you with your design or simply double check that your appliances will fit correctly in the cabinets, this service is free of charge.

Internet #310412520 / Model #MCP3696-WS

Our panels are finished on all 6 sides; both faces and all 4 edges. The panels only come in 5/8” thickness.

Yes, however, you will need to build up the bottom using raw materials to make a “toe kick” space as the cabinets can’t sit directly onto the floor. The recommended toe kick space is 4.5” H however you can make adjustments to that if your site conditions require it.

We have a matching vanilla white toe kick, model number 310412248

Minimum height leg is 2 ½” (this is when the legs are in the fold down position)

Finished height of 94.5″ including Leg, and it is not recommended to remove legs out of the cabinet.

The Legs are pressed in and can be “POPPED” out with a flat screwdriver or a small pry bar. Note that some minor chipping may occur. We do not recommend removing the legs, damages that occur while removing legs are not covered under your warranty.

We do not recommend removing the entire adjustable base from our cabinets and installing directly on the floor, as your doors, or drawers in this case, will not operate properly as it will tend to scrape the floor when opening. You may remove the adjustable portion of the leg, but not the base, which is doweled to the carcass.

The legs are 2 ¼” H when in the folded position, they are a min of 3 ¾” H when unfolded and are 5 ½” H when adjusted to the maximum height.

No, they can be removed completely but it is not recommended. To remove you can use a flat heat screwdriver to pop the legs out as they are pressed in / dowelled however, chipping to the cabinet box may occur.

No, the cabinets cannot be ordered without the legs. The legs can be removed completely but it is not recommended. To remove you can use a flat heat screwdriver to pop the legs out as they are pressed in / dowelled however, chipping to the cabinet box may occur.

The legs are made with a very durable PVC (plastic) material. They are strong enough to easily support any type of stone countertops including granite or quartz.

We do not recommend removing the entire adjustable base from our cabinets and installing directly on the floor, as your doors, or drawers in this case, will not operate properly as it will tend to scrape the floor when opening. You may remove the adjustable portion of the leg, but not the base, which is doweled to the carcase.

No, the legs cannot be purchased separately.

No, these legs are not meant to be exposed. You can just put a toe kick on them.

Yes, our base cabinets come with a pair of clips in a small bag on the inside of the cabinet. The clips insert into the pre-moulding sections on the front of the legs. The clips then hold the toe kicks in place as per below illustration.

We do not sell cabinet with caster wheels. Our cabinets will come standard with adjustable legs. The legs can be removed completely but it is not recommended. To remove you can use a flat heat screwdriver to pop the legs out as they are pressed in / dowelled however, chipping to the cabinet box may occur.

Yes, the cabinet hinges on the right as a standard, however you can switch the hinge position before you drill the door for hardware.

No, our cabinets are not primed for paint, they come already painted in our off-white and gray colors using our hand-painted 8-steps process. Removing or adding paint to the product will void your warranty.

No, the side are made of laminated particle board.

Our paint is proprietary to our product so there is no equivalent that we are able to recommend. However, most paint suppliers can easily color match paint if you bring a sample for them to match.

Yes, the doors are painted on all sides.

Vanilla white is a rich tint of off-white. Samples are available through our website.

No, they are not available in dove grey.

We don’t carry samples of our competitor products to compare the White; Our Vanilla white is a rich tint of off white. Samples are available through our website.

For base and wall cabinets the shelves are always adjustable / removable. For tall cabinets most shelves are adjustable / removable however, there are some fixed shelves to provide lateral stability to the tall units. Our tall cabinet specifications are on page 34 of our brochure at J Collection Brochure – J Collection.

Our drawer boxes come in 3 heights 5” H, 10” H, 15” H. The vertical height is approx.. 2” less that the drawer box height. The usable height between fixed shelves depends on the cabinet configuration. Our specifications are available in our brochure at J Collection Brochure – J Collection

Roll out shelves are available for a number of our base and tall configurations, details are available in the specifications sections of our brochure at J Collection Brochure – J Collection

For wall and shallow base cabinets the inside measurement of a shelf would be 13” D, for standard base and tall cabinets the inside depth is 23”D.

No, the shelves come standard, however you can remove most shelves. The exception are the fixed shelves on tall cabinets, these shelves provide structural integrity to the cabinets and cannot be removed. Details are available in the specifications sections of our brochure at J Collection Brochure – J Collection

For base and wall cabinets the shelves are always adjustable / removable. For tall cabinets most shelves are adjustable / removable however, there are some fixed shelves to provide lateral stability to the tall units. Our tall cabinet specifications are on page 34 of our brochure at J Collection Brochure – J Collection.

Unfortunately, we do not sell shelves separately. However, you will likely find there are ample shelves in our wall, base and tall units.

No, our shelves come matching the inside of the cabinet box.

Our cabinets are finished on both left and right sides only. The top and bottom of the cabinets are unfinished

Our drawers come in 5 widths, 15” (inside = 10 11/16), 18” (inside = 13 11/16”), 24” (inside = 20 11/16”), 30” (inside = 25 11/16) and 36” (inside = 31 11/16)

weight limit for the microwave shelf is 350 lbs

Weight Capacity of each Drawer would be of 77lbs.

The weight capacity of our reinforced shelf is 330lbs.

Weight limit for pull out shelves are rated for 55 pounds.

Our floating shelves can hold about 10 lbs.

The weight limit for the sliding drawers is 55lbs.

It can handle about 10 lbs.

The glass is frosted; however, you can still see silhouettes through it.

Currently, we only offer the frosted glass.

It is recommended that wall cabinets are installed 1.5” from the ceiling.

Yes, the cabinets come hinges on the right as a standard, however you can switch the hinges positions before you drill the doors for hardware.

Although we do not sell hinges or other parts separately, we do cover hinges under warranty. If you have an issue with a hinge you can request a replacement.

No, currently, only our doors are offered with soft close mechanism.

The below images show how to adjust the hinges, if you need further assistance please advise and we will send you an instruction video

No, the door handles are not included.

Our microwave cabinet will hold most standard microwaves with a trim kit. The microwave itself will be smaller in size and needs a trim kit to properly.

We have four configurations to accommodate most standard microwave / oven combination appliances. Specifications are available at J Collection Brochure – J Collection. It is important for you to check appliance dimensions prior to purchasing to ensure the appliances will fit into cabinets properly.

Our panels are finished on all 6 sides, (both faces and the 4 edges).

The base moulding is meant to be installed on a flat panel to create a furniture look, for example on the back and sides of an island. However, you can install it flush to the front of a cabinet by building a strip (raw wood or a filler piece can be used) under the toe kick area and the base moulding can attach to the front of the strip.

We design and assemble our cabinets in the USA.

Yes, our cabinets will arrive assembled.

No, these products cannot be custom ordered.

It may surprise you to know that painted MDF doors are very similar price to solid painted maple. We use MDF has it prevents hairline fractures at the joint in doors, this means our doors will look great for years to come. We offer a limited warranty so if you have any issue with the quality of our products you are covered.

No, we would not recommend using markers on any product outside of an actual dry erase board. However, our designers have been able to incorporate dry erase boards and chalk boards into many spaces. We are happy to help you with your design free of charge.

No, as our base cabinets come with legs and we do not recommend removing the legs you can not stack base cabinets. However, there are many other options to stack cabinets to create your desired effect. We are happy to help you with you design free of charge

No, this is not how cabinets are meant to be used. The only thing a washer / dryer can sit on (besides the floor) are pedestals that are purchased from the same appliance brand. The reason is they have special brackets to clip onto to prevent the machines from falling / tipping over and creating a safety hazard. We strongly advise against deviating from the appliance manufacturers safety recommendations.

There are many options for microwaves that will fit, the first step would be to find a 30” trim kit (many brands will have options for these such as GE, Whirlpool, Panasonic etc). Once you decide of the trim kit, the specs available online under the trim kit will tell you the exact model of microwaves that will work with your trim kit. We are happy to help you with your design or simply double check that your appliances will fit correctly in the cabinets, this service is free of charge.

Internet #310412520 / Model #MCP3696-WS

Our panels are finished on all 6 sides; both faces and all 4 edges. The panels only come in 5/8” thickness.

Yes, however, you will need to build up the bottom using raw materials to make a “toe kick” space as the cabinets can’t sit directly onto the floor. The recommended toe kick space is 4.5” H however you can make adjustments to that if your site conditions require it.

Gray Type Kitchen

Can't find an
answer?

submit your query here